Aluminium Products
This is an eight seater cycle produced from aluminium extrusion. Tolerances were very important on this project with a margin of error in some locations of +/- 0.5mm. This was a completely welded assembly and was produced entirely from the 3D model shown.
Due to our investment in machinery and staff we can boast a seamless join on welded frames and corners. The lighting corners opposite are an example of this.
All frame sizes and shapes produced to customer requirements.
This product is a motorcycle recovery stand (DYNACYCLE). This product went through all stages of development, from design, to prototyping and eventually to production. We now produce this product in batch quantities for our customer who distributes across the UK and Europe, as well as exporting to the US.
This bed leg is manufactured from 1.2mm aluminium and is seam welded. No penetration is permissible on the inside of the uprights.
This is a display stand for Honda Motorbike showrooms.
Aluminium Ladder produced for Coquet lighthouse
Aluminium access platform produced again for Coquet lighthouse
Aluminium Platform for mounting lanterns on Buoys
Carried out modification to battery boxes on these aluminium lower module structures
These are aluminium corner fittings for heated skirting extrusion.
Welded end caps to aluminium extrusion
Aluminium frame with steel reinforcement bar for concrete base.
Modified battery box when painted and fitted.
Designed and drawn on 3D CAD software prior to fabrication this aluminium facia for a Reception roof is all produced from formed aluminium sheet.
This is a motorcycle removal frame. All parts fully welded.
Light fitting produced by bending and forming aluminium extrusion. All parts have then been anodised to give a silver satin finish.
This product is an aluminium counterweight for a lantern on a lightship. The aluminium in this construction is 30mm thick! A black anodise finish has been applied to give protection in a harsh marine environment.